Time delay coupled with Class CC current-limiting response provides close sizing on small motor and relay circuits
Provides maximum component short-circuit current rating protection
200kA interrupting rating provides high ratings for control circuit locations
Class CC rejection feature, with appropriate fuse block, prevents inserting lesser-rated supplementary fuses
Selective coordination ratio of 2:1 (within Low-Peak fuse family) prevents electrical shutdowns from extending beyond the failed circuit
Product Description ' Fuse, 15A Fuse Amps, Nonindicating, LP-CC Series, 600VAC/150VDC Voltage Rating, Time Delay, CC Class, Dual Element, Body Material Melamine, Rejection, Body Style Cylindrical, Interrupt Rating 200kA at 600VAC, 20kA at 150VDC, Length 1-1/2 In., Diameter 13/32 In., Functionally Equal To Mersen/Ferraz Shawmut ATDR, Littelfuse CCMR, Standards CE/UL-248-4 Guide JDDZ/CSA Class 1422-02 ' From the Manufacturer LP-CC LOW-PEAK Yellow Fuse. A superior all-purpose, space-saving branch circuit fuse that meets most protection requirements up to 30A. Very compact; physical size is only 13/32-Inch x 1-1/2" (10.3mm x 38.1mm) with rejection tip. The unique yellow color makes it easy to tell that the correct fuse type is installed. Faster response to damaging short-circuit currents and higher interrupting rating than mechanical overcurrent protective devices. 200,000A Interrupting Rating. Maximum interrupting rating for available fault current in today's large capacity systems. Helps ensure that future growth will not obsolete the system. Dual Characteristics. Time-delay to avoid unwanted fuse openings from surge currents. Fast speed of response under short-circuit conditions for a high degree of current-limitation. ADVANTAGE: The LOW-PEAK fuse can be sized close to full load ratings for maximum overload and short-circuit protection. ADVANTAGE: Can be used where either a time-delay or a fast-acting fuse is needed, making selection easier and reducing spare fuse inventories for substantial cost reduction. Superior Motor Protection. For protection of small horsepower motor circuits. Proper sizing can provide Type "2" coordinated protection for NEMA and IEC motor controllers. Motors receive maximum protection against burnout from overloads and single phasing
